-
Leasing Equipment—Debulky water & Deoiling hydrocyclones
A test skid with one debulky water hydrocyclone unit installed of two DW hydrocyclone liners and two deoiling hydrocyclone units of each installed of a single liner MF type. The three hydrocyclone units are designed in series to be used for testing the practical well stream with high water content at specific field conditions. With that test debulky water and deoiling hydrocyclone skid, it would be able to foresee the real result of water removal and produced water quality, if the hydrocyclone liners to be used for the exact field and operational conditions.
-
Leasing Equipment—Deoiling hydrocyclone
A hydrocyclone skid with a boost pump of progressive cavity type installed of a single liner is to be used for testing the practical produced water at specific field conditions. With that test deoilding hydrocyclone skid, it would be able to foresee the real result if the hydrocyclone liners to be used for the exact filed and operational conditions.
-
Leasing Equipment—Desanding hydrocyclone
A desanding hydrocyclone skid equipped with a single liner and an accumulator vessel will be used to test practical applications under specific field conditions, including well gas with condensate, produced water, well crude, and other fluids. The skid is outfitted with all necessary manual valves and local instrumentation.
Using this test desanding hydrocyclone skid, it will be possible to predict real-world performance when deploying PR-50 or PR-25 hydrocyclone liners under actual field and operational conditions, such as:
Produced water desanding – Removal of sand and other solid particles.
Wellhead desanding – Removal of sand, scales, corrosion products, and ceramic particles (e.g., those injected during well fracturing).
Gas wellhead or wellstream desanding – Removal of sand and other solid particles.
Condensate desanding – Solid particle separation from condensate.
Other solid-liquid separation applications.
-
Leasing Equipment—PR-10， Absolute Fine Particles Compacted Cyclonic Remover
The PR-10 hydrocyclonic element is designed and patented construction and installation for removing those extremely fine solid particles, which density is heavier than the liquid, from any liquid or mixture with gas. For example, produced water, sea-water, etc. The flow enters from the top of vessel and then into the “candle”, which is consisted of varies number of discs in which the PR-10 cyclonic element are installed. The stream with solids are then flows into the PR-10 and the solid particles is separated from the stream. The separated clean liquid is rejected into the up vessel chamber and routed into the outlet nozzle, while the solid particles are dropped into the lower solids chamber for accumulating, located in the bottom for disposal in batch operation via the sand withdraw device ((SWDTM series).
-
Leasing Equipment—Solids desander by cyclonic sand removal separation
The filter element is made of high-tech ceramic wear-resistant materials,with a sand removel efficiency of up to 2 microns at 98%.
